Single-shell dryer TTD are particularly robust and are suitable both for finely grained materials as well as for particularly coarse bulk materials or sludges.
SINGLE SHELL DRYER TTD
The Rotary Dryer is a type of industrial dryer employed to reduce or minimize the
liquid moisture content of the material it is handling by bringing it into direct contact with a
heated gas. Industrial dryer like MOZER which is made up of a large, rotating cylindrical
tube, usually supported by barrel ring arrangement. In direct heat Rotary Dryers a
continuous feed of wet particulate material is dried by contact with heated air, while being
transported along the interior of a rotating cylinder, with the rotating shell acting as the
conveying device and stirrer.
We offer Single Shell Rotary Dryers in co-current and counter current operation. In the
former the wet material is exposed to the hottest air which enables heat sensitive or sticky
materials to be dried successfully. In counter current arrangement dried material exposed to
hottest air helping to achieve high dry material temperature. The hot gases may enter rotary
dryer at the temperature of up to 800 C or even higher. The gas stream can be made up of
a mixture of air and combustion gases from a burner. Alternatively, the gas stream may
consist of hot air while is heated indirectly through heat exchanger. Often, dryers heated via
a heat exchange are used when product contamination is a concern.
SCOPE OF DELIVERY
The dryers can be supplied for very high solid throughput rates or evaporation performance.
Diameter: Up to approx. 3
Lengths: Up to approx. 20 m
The source of heat can be from fuel like LDO, HSD, furnace oil, Natural gas, LPG etc.